How to replace the washbasin faucet in the bathroom
Release Time:
2024-02-22 10:15
Once the faucet in the bathroom is broken, it needs to be replaced. How to replace the bathroom sink faucet? Let's find out together.
1. Before starting to disassemble the basin faucet, find the water inlet valve. The water inlet valve is usually installed on the wall below the basin. Screw on the angle valve first to cut off the water, otherwise a lot of running water will be wasted in the process of disassembling the basin faucet.
2. After screwing on the angle valve, there will still be some water left in the water pipe, open the faucet to drain the remaining water.
3. When installing the basin faucet, use the water inlet hose to connect the water inlet port of the basin faucet to the angle valve. When disassembling, hold the water pipe with one hand, twist the wrench with the other hand, and remove the end of the water inlet hose connected to the basin faucet.
4. When installing the basin faucet, it needs to be tightened after connecting the water inlet hose; the nut will lock it, so after removing the water inlet hose, find the fastener of the basin faucet and unscrew it with pliers or a wrench, Remove the basin faucet.
Basin faucet
Related News
2022-08-11
How to classify basin faucets, do you know
2022-08-11
What are the sanitary ware?
Kaiping Linpai Sanitary Ware Co., Ltd.
Add: No. 3, Dongle Road, Shuikou Town, Kaiping City, Guangdong, China
Tel: +86-18128280220
Email: maykuang@ikenkp.com
Follow Us